This two-piece snap tack consists of a male acetal (POM) tack and a female PA66 UL94V2 button retainer. The snap tack can be used as an emergency button, no sewing expertise, thread or needle is required. The fastener has a sharp point for piercing soft materials that will not require a pre-punched hole. It is easily assembled by pushing the tack through the front of the soft material and pushing the retainer to the second detent (no tool required). After assembly simply break off the pointed end and the remaining end will be shielded by the retainer.

Drawing PDF:  
UL94:   V2*  
IP:   
RoHS:    
Measures expressed in: Millimeters


Reference
Hole size
Panel thickness
A
B
Type
 
 
 
More
Info.
00100300494 · · 9,52 3,17 FEMALE  
00100300495 3,07 1,59 11,11 2,38 Male A  
00100300496 3,07 3,17 11,11 2,38 Male A  
00100300497 3,07 4,76 11,11 2,38 Male A  
00100300498 3,07 4,76 11,11 2,38 Male B  

If you are interested in our family MTPM, you may be interested in these families as well:

The two-piece dome and tack rivet-fastener has the locking mechanism totally enclosed to prevent tampering. No exterior sharp edges will appear after the part is assembled. This dome and tack rivet is designed not to be desassemble easily, so it is not reusable.   This two-piece rivet is designed for flexible plastic I.D. or security bracelet. Male and female rivets snap into pre-punched holes in the plastic bracelet and then snap together. It is very difficult to remove without damaging, preventing its loss or its modification. Male and female parts are packed and sold separately.  


lkd  ig  ig


PYME