The split wire routing design allows loading of wires by separating the cup at the split and then inserting the prongs of the clip into a hole in the panel.

Material: PA66  
Standard colors: Natural - Black
UL94:   V2  
IP:   
RoHS:    
Measures expressed in: Millimeters
Drawing PDF:  


Reference
Panel Hole Size
Panel Thickness
B1
D1
B
D
A
C
 
PDF
3D IGS
Add
00101100540 6,35 0,79 to 2,00 21,08 19,05 27,94 27,94 6,76 6,86      

If you are interested in our family MAPO, you may be interested in these families as well:

Our locking wire and cable holder is used for routing wires and cables. It has been designed to fit 4.75mm hole diameters and variable panel thicknesses from 2.30mm to 3.70mm. Wires and cables can be mounted and removed again and again thanks to its locking system which is releasable by twisting open.   Our locking wire and cable holder is used for routing wires and cables. It has been designed to fit 4.76mm hole diameters and variable panel thicknesses up to 2.29mm. Wires and cables can be mounted and removed again and again thanks to its locking system which is releasable by twisting open.   Our wire/cable holders are designed to mount into 4.76mm hole diameters. Our wire/cable holders can be used in a variety of panel thicknesses and materials. Sizes are available to handle wire bundle diameters from 9.53mm to 12.70mm.   Our locking wire and cable holder is used for routing wires and cables. It has been designed to fit 4.75mm hole diameters and variable panel thicknesses from 2.30mm to 3.70mm. Wires and cables can be mounted and removed again and again thanks to its locking system which is releasable by twisting open.   Our wire/cable holders are designed to mount into 4.76mm hole diameters. Our wire/cable holders can be used in a variety of panel thicknesses and materials. Sizes are available to handle wire bundle diameters from 9.53mm to 12.70mm.  





PYME