Our MPRY cable retainer is designed to secure and protect cables at panel entry points. It absorbs tensile, pushing and torsional forces applied to the cable, providing electrical and mechanical protection. It offers good resistance to chemicals and good electrical properties.

Installation is carried out by snap-in fixing in panel holes. Available for round and flat cables.

The system can be installed in two types of hole, depending on the required level of fixing:
· A: the hole allows the part to rotate.
· A × B: the part is fixed in the hole, preventing rotation.
(For ref. 02001002217, a special hole is required; see the general technical drawing).
(Refs. 02001002244 / 02001002251 / 02001002252 must be installed in an oval hole).

· Material: PA66 (Polyamide 66)
· Colours: Black / White
· Operating temperature: -18 °C to +105 °C
· Flammability: UL94 V2, self-extinguishing
· Certifications: UR, CSA

For installation in the structure, the use of the MHPA tool is recommended; alternatively, it can be carried out using pliers.

For references where the Cable suitability is Multiple, consult the general technical drawing, which indicates the different compatible cable sizes. When dimension A or B is specified as a range, consult the same drawing to determine the hole size corresponding to each compatible cable size.

Other colours are available on request for specified quantities.


Drawing PDF:  
UL94:   V2  
IP:   
RoHS:    
Measures expressed in: Millimeters
Video:  


Reference
A
B
Max. panel thickness
L
Suitable for cable
Round cable
Flat cable
Cable type
 
 
 
More
Info.
02001002200 9,50 8,40 1,60 10,30 3,2 to 4,8     AWM  
00101000061 9,50 8,40 1,60 10,40 3,0 x 5,6     SPT1  
00101000060 9,50 8,40 1,60 10,40 3,2 to 3,9     AWM  
00101000059 9,50 8,40 1,60 10,40 3,9 to 4,7     AWM  
00101000058 9,50 8,40 3,20 10,40 3,0 x 3,9     SPT1  
02001002229 9,50 8,80 1,60 10,30 2,3 x 4,6
2,8 x 5,3
    CLOCK
X
XT
SPT1
 
02001002230 9,50 8,80 3,20 10,30 2,3 x 4,6
2,8 x 5,3
    CLOCK
X
XT
SPT1
 
02001002244 9,50 to 11,10 15,9 to 16,3 2,50 11,90 Multiple     SPT1
SPT2
 
02001002245 9,50 to 11,10 15,9 to 16,3 4,00 11,90 Multiple     SPT1
SPT2
 
02001002231 11,10 9,90 1,00 10,30 3,0 x 5,6     SPT1  
02001002232 11,10 9,90 1,60 10,30 3,0 x 5,6     SPT1  
00101000063 11,10 9,90 1,60 10,40 3,0 x 5,6     SP1
SPT1
 
02001002233 11,10 9,90 2,50 10,30 3,0 x 5,6     SPT1  
02001002234 11,10 9,90 4,00 10,30 3,0 x 5,6     SPT1  
02001002236 12,70 11,30 1,60 10,30 3,0 x 7,6
3,8 x 7,1
    SPT1
SPT2
HPN
 
02001002237 12,70 11,30 2,50 10,30 3,0 x 7,6
3,8 x 7,1
    SPT1
SPT2
HPN
 
02001002235 12,70 11,30 2,50 11,20 3,0 x 5,6     SPT1
SPT2
HPN
 
02001002238 12,70 11,30 4,00 10,30 3,0 x 7,6
3,8 x 7,1
    SPT1
SPT2
HPN
 
02001002201 12,70 11,40 1,60 11,10 5,6 to 6,2     SV
SVT
 
00101000077 12,70 11,40 1,60 11,10 6,4 to 7,4     SV
SVT
HPD
 
02001002202 12,70 11,40 2,50 11,10 5,6 to 6,2     SV
SVT
 
00101000078 12,70 11,40 2,50 11,10 6,4 to 7,4     SV
SVT
HPD
 
02001002205 12,70 to 13,50 11,40 2,50 11,10 6,4 to 7,6     SV
SVT
HPD
SJT
 
02001002207 12,70 11,40 2,50 11,10 6,5 to 7,4     SV
SVT
HPD
 
02001002206 12,70 to 13,50 11,40 4,00 11,10 6,4 to 7,6     SV
SVT
HPD
SJT
 
00101000065 12,70 11,70 2,40 12,60 4,1 x 10,1     SPT2
HPN
 
00101000066 12,70 11,70 2,40 12,60 4,1 x 10,1     SPT2
HPN
 
02001002243 12,70 to 13,10 11,70 4,70 12,70 Multiple     SPT1
SPT2
HPN
 
00101000070 12,70 11,70 4,70 12,60 4,1 x 10,1     SPT2
HPN
 
02001002239 12,70 11,80 1,00 13,90 3,0 x 7,6
3,8 x 7,1
    SPT1
SPT2
HPN
 
00101000064 12,70 11,80 1,60 10,30 3,0 x 7,6     SPT1
SPT2
HPN
 
00101000072 12,70 11,80 1,60 10,30 3,0 x 7,6     SPT1
SPT2
HPN
 
02001002240 12,70 to 13,10 11,80 1,60 13,90 3,0 x 7,6
3,8 x 7,1
4,1 x 7,6
    SPT1
SPT2
HPN
 
00101000092 12,70 11,80 2,30 11,10 7,6     SJ
SJT
SJO
 
02001002209 12,70 11,80 2,30 11,10 7,6     SJ
SJT
SJO
SPT3
 
00101000067 12,70 11,80 2,50 10,30 3,0 x 7,6     SPT1
SPT2
HPN
 
02001002241 12,70 to 13,10 11,80 2,50 13,90 3,0 x 7,6
3,8 x 7,1
4,1 x 7,6
    SPT1
SPT2
HPN
 
00101000071 12,70 11,80 3,90 10,30 3,0 x 7,6     SPT1
SPT2
HPN
 
00101000104 14,20 18,50 3,20 17,00 4,1 x 10,4     SPT1
SPT2
 
02001002251 14,20 18,50 3,20 17,10 Multiple     SPT2
SPT3
 
02001002203 14,20 18,50 3,20 17,10 6,4     ·  
02001002208 14,20 18,50 3,20 17,10 6,7     ·  
02001002249 14,30 13,50 1,60 15,50 Multiple     SPT2
SPT3
HPN
 
00101000076 14,30 13,50 1,60 15,50 4,1 x 10,1     SPT2  
02001002246 14,30 13,50 3,20 15,50 Multiple     SPT2
HPN
 
02001002250 14,30 13,50 3,20 15,50 Multiple     SPT2
SPT3
HPN
 
00101000075 14,30 13,50 3,20 15,50 3,8 x 10,1     SPT2  
00101000079 14,30 13,50 3,20 15,50 4,1 x 7,6     SPT2
HPN
 
00101000062 15,90 9,50 2,50 11,60 3,8 x 10,1 4,1 x 10,4 8,1 x 16,5     SPT2
SPT3
 
00101000086 15,90 13,80 1,60 15,20 3,0 x 7,6     SPT1  
02001002247 15,90 14,00 1,60 14,70 3,0 x 7,6
4,1 x 10,4
    SPT2  
00101000084 15,90 14,00 1,60 14,70 7,2     SJT
SJO
 
02001002212 15,90 14,00 1,60 14,70 7,6 to 8,4     SJT  
02001002214 15,90 14,00 1,60 14,70 8,3 to 9,1     SJ
SJT
SJO
 
02001002222 15,90 14,00 1,60 14,70 9,7 to 10,3     S
ST
 
00101000083 15,90 14,00 1,60 14,70 9,9 to 10,3     SJ
SJT
SJO
 
00101000081 15,90 14,00 1,80 15,10 9,0 to 10,9     SJ
SJT
 
02001002248 15,90 14,00 2,50 14,70 3,0 x 7,6
4,1 x 10,4
    SPT2  
00101000090 15,90 14,00 3,20 14,70 5,0     SJ
SJT
SJO
 
00101000091 15,90 14,00 3,20 14,70 7,6     SJ
SJT
SJO
 
02001002211 15,90 14,00 3,20 14,70 7,6     SJ
SJT
SJO
 
02001000950 15,90 14,00 3,20 14,70 8,3 to 9,1     SJ
SJT
SJO
 
02001002223 15,90 14,00 3,20 14,70 9,7 to 10,3     S
ST
 
00101000088 15,90 14,00 3,20 15,10 8,3 to 9,1     SJ
SJT
SJO
 
00101000080 15,90 14,00 3,20 16,90 8,3 to 10,9     SJ
SJT
SJO
 
02001002213 15,90 to 17,40 14,00 4,00 17,20 7,6
8,3 to 8,4
9,0
    SJ
SJT
SJO
HPD
 
00101000085 15,90 14,40 1,60 15,20 3,0 x 7,6     SPT1  
00101000096 18,70 16,70 3,20 14,90 4,1 x 10,4     SPT2  
02001002218 19,00 to 19,80 16,80 1,60 19,10 9,1 to 10,3
10,9
    SJT
S
ST
 
00101000095 19,00 16,80 3,20 18,90 9,1 to 10,9     SJTO
SJT
S
STO
 
02001002252 19,00 22,20 3,20 19,80 Multiple     SPT3  
00101000106 22,20 19,10 3,20 19,50 6,2 x 10,8     SPT3
HPN
 
00101000093 22,20 19,60 3,20 19,10 8,3 to 9,1     SJ
SJT
SJO
 
02001002216 22,20 19,60 3,20 19,10 8,3 to 9,1     SJ
SJT
SJO
 
02001002217 22,20 19,60 3,20 19,10 8,3 to 9,1     SJ
SJT
SJO
 
00101000097 22,20 19,60 3,20 19,10 9,4 to 10,9     SJT
S
STO
 
02001002220 22,20 19,60 3,20 19,10 9,4 to 10,9     SJT
S
ST
SO
 
02001002221 22,20 19,60 5,10 19,10 9,4 to 10,9     SJT
S
ST
SO
 
02001002254 22,20 21,20 3,20 20,60 8,1 x 16,5     SPT3  
02001002225 22,20 21,30 1,60 21,00 13,5 to 15,3     S
ST
 
00101000107 22,20 21,30 3,20 20,60 7,4 x 16,5     SPT3  
02001002253 22,20 21,30 3,20 20,70 Multiple     SPT3  
00101000105 22,20 21,30 3,20 20,60 10,8 x 12,5     SJT
SPT3
 
02001002224 22,20 21,30 3,20 20,60 10,8 to 12,1     SJT  
00101000098 22,20 21,30 3,20 20,60 13,5 to 15,2     S
ST
 
02001002226 22,20 21,30 3,20 20,60 13,5 to 15,3     S
ST
 
02001002227 22,20 21,30 4,80 20,60 13,5 to 15,3     S
ST
 
00101000094 24,30 19,60 3,20 19,10 8,3 to 9,1     SJ
SJT
SJO
 
00101000099 27,70 25,40 7,10 25,10 14,4 to 17,7     S  
02001002228 27,70 to 30,20 25,40 7,10 25,40 15,2 to 16,3
17,5
    S
ST
SO
SRDT
 

If you are interested in our family MPRY, you may be interested in these families as well:

This strain relief bushing fastens and protects securely cables and wires. To install, the bushing hinged halves are simply folded over the wire or cable, this eliminates fatigue assembly steps. No special orientation or alignment is necessary (patented). This tough nylon bushing meets all <b>Underwriters Laboratories</b> stringent pull-out and temperature specifications, and meets <b>Canadian Standards Association</b> Requirements as it is molded of heat stabilized nylon UL94V2 black. Some references can be supplied in white colour, please contact us. Conventional strain relief pliers are applied to the specially designed gripped grooves and the bushing is inserted and locked in place in one smooth motion. The design of the part incorporates a bullet shaped nose to facilitate its insertion. Installation tools are available, see our family MHPA(manual), MHPB(manual and ergonomic), MHPC(pneumatic) o MHPD(pneumatic and ergonomic)  from our group Miscellaneous.   This strain relief bushing fastens and protects securely cables and wires. To install, the bushing hinged halves are simply folded over the wire or cable, this eliminates fatigue assembly steps. No special orientation or alignment is necessary (patented). This tough nylon bushing meets all <b>Underwriters Laboratories</b> stringent pull-out and temperature specifications, and meets <b>Canadian Standards Association</b> Requirements as it is molded of heat stabilized nylon UL94V2 black. Some references can be supplied in white colour, please contact us. Conventional strain relief pliers are applied to the specially designed gripped grooves and the bushing is inserted and locked in place in one smooth motion. Installation tools are available, see our family MHPA(manual), MHPB(manual and ergonomic), MHPC(pneumatic) o MHPD(pneumatic and ergonomic)  from our group Miscellaneous.   This strain relief bushing fastens and protects securely cables and wires. To install, the bushing hinged halves are simply folded over the wire or cable, this eliminates fatigue assembly steps. No special orientation or alignment is necessary (patented). This tough nylon bushing meets all <b>Underwriters Laboratories</b> stringent pull-out and temperature specifications, and meets <b>Canadian Standards Association</b> Requirements as it is molded of heat stabilized nylon UL94V2 black. Some references can be supplied in white colour, please contact us. Conventional strain relief pliers are applied to the specially designed gripped grooves and the bushing is inserted and locked in place in one smooth motion. Installation tools are available, see our family MHPA(manual), MHPB(manual and ergonomic), MHPC(pneumatic) o MHPD(pneumatic and ergonomic)  from our group Miscellaneous.   * <i>Adjustable Ergonomic Strain Relief Tool has been carefully designed to help reduce the wrist fatigue associated with bushing installation.
<br>
* <i>The handles are preset to a specified angle, allowing the hand and wrist of the operator to naturally align during normal use.
<br>
* <i>This tool is fully adjustable and will install all sizes of ISC Strain relief bushings (not available for hole sizes larger than 16 mm – 5/8”).   * <i>Adjustable Pneumatic-Ergonomic Strain Relief Tool is designed to aid in rapid assembly of strain relief bushings. The easy finger tip actuation of this air tool greatly lessens the gripping power necessary to install bushings, while reducing the hand and wrist fatigue generated during moderate to high volume manufacturing.
<br>
* <i>The tool operates on standard shop air from 50 to 90 PSI. Low weight, only 680 Grms. (24 ounces).
<br><br>
*<b>Tools are configured prior to shipping. For specific sizes, please specify strain relief bushing sizes to be installed when ordering.
Because this item needs to be configured prior to shipping, it is not available to be ordered online. Please call for details.</b>
<br>   * <i>Adjustable Pneumatic-Ergonomic Strain Relief Tool has been carefully designed to help reduce the wrist fatigue with the rapid assembly of strain relief bushings.
<br>
* <i>The easy trigger-type actuation of this air tool, in combination with the ergonomic angle of the hand grip, allow natural alignment of the wrist and hand during normal bushing installation.
<br>
* <i>The tool operates on standard shop air from 50-90 PSI. Lightweight, only 510 Grms. (18 ounces).
* <br><br>
*<b>Tools are configured prior to shipping. Please specify strain relief bushing sizes to be installed when ordering.
Because this item needs to be configured prior to shipping, it is not available to be ordered online. Please call for details.</b>
<br>
Not available for hole sizes larger than 16mm (5/8”).  



lkd  ig  ig


PYME